Operation - Dustcontrol DC 50-W Traducción Del Manual De Instrucciones De Servicio Original

Pressure generation and air flow

Operation

Connection
Connect the machine to an electrical outlet with a voltage as per the machine's rating
plate specifications. If using an extension cord, it must be water-resistant.
Emptying
If using an extension cord, it must be water-resistant.
For large amounts of water, the water pump can be switched on continuously while
sucking the water. In the case of smaller amounts of water, the machine should be
used without the water pump being switched on.
The tank is then emptied by switching the water pump on. Switch off the water pump
when the flow of water stops.
CAUTION
The water pump must not work without water flow!
If the suction stops because the container is full, the water must be evacuated with the
water pump. To drain the container completely, lift off the motor part and lay down the
machine as shown in the picture.
22 Liquids Extractor, Art.nr. 94142-I