Noise And Vibration Information - Mannesmann 12864 Instrucciones De Manejo

Discription
1. safety guard
2. front handle
3. main handle
4. power cord
5. safety blade rail
Technical dates
voltage:
power consumption:
cutting moves:
cutting length:
sound pressure level (LPA):
(Uncertainty K: 3 dB)
sound power level (LWA):
(Uncertainty K: 3 dB)
vibration:
(Uncertainty K: 1,5 m/s²)
protection class:
Be sure to wear safety-goggles and ear-protection during use!

Noise and vibration information

Measured values determined according EN 60745
- The vibration emission level given in this information sheet has been measured in accor-
dance with a standardized test given in EN 60745 and may be used to compare one tool
with another.
- The given vibration emission level may be used for the initial estimation of the real exposure.
- The vibration emission level will vary because of the ways in which a power tool can be used
and may increase above the level given in this information sheet.
- Try to keep the exposure as low as possible. To reduce the vibration emission level the user
should wear working-gloves and use the machine for limited time.
- All parts of working cycles have to be considered ( including the time the power tool is
switched off, and the time, when the power tool is running under no-load condition).
Operation
By pressing and holding of both switches in the main handle and the front handle you will start
the hedge trimmer. For safety reasons it is not possible and not allowed to fix one of both
switches for continuous operation.
230-240V ~ / 50 Hz
500 W
-1
1600 min
410 mm
82,4 dB(A)
93,4 dB(A)
3,4 m/s²
/ II
GB - 6