Connection To The Unit - JVC DLA-F110 Manual De Instrucciones

About the connection (Continued)

Connection to the unit

● Do not turn on the power until connection is complete.
● The connection procedures differ according to the device used. For details, refer to the instruction
manual of the device to be connected.
● This device is used for image projection. Connect to an audio output device such as amplifier and
speaker for audio output from the connected device.
● The images may not be displayed depending on the devices and cables to be connected.
For HDMI cable (sold separately), only use one that is HDMI-approved.
● It may not be possible to connect to this unit depending on the dimension of the connector cover of the
cables to be connected.
BD/DVD Recorder
To connect via HDMI
terminal
(Reference page: 24)
To connect RS-
232C terminal
(Reference
page: 27)
Connection by 3D SYNCHRO
terminal (Reference page: 26)
PC
This manual downloaded from http://www.manualowl.com
Connection by LAN terminal (Reference page: 28)
To connect via video terminal (Reference page: 25)
STANDBY/ON
INPUT
1 HDMI 2
OK
C P C P Y
RS-232-C R/ R B/ B
3D REMOTE
PC TRIGGER
SYNCHRO CONTROL
MENU BACK
Connection by REMOTE terminal (Reference page: 28)
To connect via Trigger terminal (Reference page: 27)
To connect via PC terminal(Reference page: 26)
ENGLISH
BD/DVD Player
VCR and
camcorder
23