Cedes cegard Instrucciones De Montaje página 8

cegard/Mini
Emitter (Tx) Connections
Emitter/
Tx edge
Emitter/
Tx edge
5. Power-up and test for correct function
Turn on power after cegard/Mini has been correctly
installed. In each edge (Rx and Tx) there is one
* This blanking function is not available in the USA and in Canada. With one broken element system works with-
out criss cross beams
8
Receiver/
Rx edge
Receiver/
Rx edge
Edge LED Color LED ON
Power OK
Rx Orange
Object detected
Tx Green Power OK
Installation and Operation Manual
Tx cable connection
for standard protection field heigth: 1,822mm
Brown: +14 ... 30 VDC
Blue: GND (0 V)
Black: n.c
White: Height Selector not connected
or connected to GND (blue)
Tx cable connection
for reduced protection field heigth: 1,582mm
Brown: +14 ... 30 VDC
Blue: GND (0 V)
Black: n.c
White: Height Selector connected to U
Application:
If there a parts in the door construction (e.g. doorcam)
which are moving through the protection field during
door closure certain elements of the light curtain have
to be disabled
Important:
1. This setting does not fulfill EN 81-70
2. Blanking function is not possible with reduced
protection field (see page 4)
optical indicator (green LED) which indicates the
light curtain status.
LED OFF
No Power or
No object
No Power
www.cedes.com
SP
LED flasing
1 element broken*
(Muting function, page 5)
-
© CEDES/December 2008
(brown)