Conference; Mailbox; Alarm; Programming The Alarm - Siemens euroset 3020 Instrucciones De Manejo

Conference

The conference service allows the setting
up of communication among three people.
Firstly set up two communications by using
the procedures of Call Waiting
Consultation described earlier. Then press
the Conference key to establish
simultaneous communication among the
three people.

Mailbox

The Mailbox service allows messages to be
stored so that the user can hear them later.
This service has an access code that can
be programmed in the Mailbox key (see
the item Mailbox on page 7).

Alarm

The alarm sounds daily at the programmed
time and shows on the display, when
alarming, the message "ALARM", the time
and the date. The alarm stops ringing after
40 seconds or after lifting the handset.
If the telephone is off hook at the
programmed time, there will be no audio
signaling, only the message on the display.
The alarm rings at a single volume,
independent of the ring
programming.
The melody of the ring is the same
programmed for the call signaling and the
ring rhythm of the alarm (1 second followed
by a 3 second pause) is distinct from the
normal rhythm generated by central office
exchange.
In case of collision between the entering
call and the alarm, the entering call has
priority, it means:
• The ring will be in the rhythm of the call;
• If there is call identification, the alarm
clock message on the display will not be
shown.

Programming the alarm

Press the MENU key
Select the ALARM option by using the
DIAL/SELECT key
or
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
Select the ENABLED option by using
the ARROW key
Press the DIAL/SELECT key
Enter the desired time for the alarm
: with four digits in 24h format (example:
13:57h - enter 1357)
Press the MENU key

Deactivating the alarm

Press the MENU key
Select the ALARM option by using the
DIAL/SELECT key
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
Select the DISABLED option by using
the ARROW key
volume
Press the MENU key
15