Power Source; Using The Power Jack And Ni / Al Switch - TruTalk TK514 Instrucciones De Operación

POWER SOURCE

You can power your TK514 base station from either 120V AC (household)
power from the included AC power adaptor OR with 4 "AA" alkaline or
rechargeable Ni-Cad batteries (not included).

Using the Power Jack and NI / AL Switch

Use the AC power jack to connect the provided AC adaptor, or to charge
rechargeable Ni-Cad batteries while they are installed in the TK514 Base
Station Radio. Note: Alkaline batteries CANNOT be recharged in-unit.
If you choose battery operation, set the NI / AL switch by the type of batteries
you are using. Set to AL for Alkaline or NI for rechargeable Ni-Cad
batteries. When using AC power operation, you MUST REMOVE ANY
INSTALLED ALKALINE BATTERIES; the switch can be in either position.
The Battery Door is located on the base of cabinet. Press tab down to open
the door; load batteries following the polarity diagram embossed in cabinet.
CAUTION: Prior to setting the switch to NI, check to ensure that the installed
batteries are rechargeable Ni-Cad batteries. Charging alkaline or regular
Ni-Cad batteries may cause the batteries to burst, causing injury to persons
and/or damage to the radio unit.
The NI / AL Switch is located
on the back of cabinet. Select
switch position by battery type.
6