CORRECT USE OF THE PRODUCT
This equipment is intended for domestic use,
in accordance with the descriptions and
instructions contained in this manual.
The system delivers saturated steam at a
high temperature combined with HPMed. The
system lowers the bacterial, fungous and
viral load on the surfaces to which it is
applied. This makes it possible to reduce the
possibility of cross-infections. Read these
instructions carefully and keep them for
future reference.
Polti S.p.A declines all liability for any
damages or accidents deriving from any use
of this appliance which is not in conformity
with
the
instructions
manual.
HPMED
The characteristics of HPMed make it the
ideal complement to the sanitising action of
the saturated steam at a high temperature
delivered by Steam Disinfector Polti.
The system is able to sanitise all surfaces at
risk
of
contamination
organisms, such as bacteria, fungi and
viruses.
When combined with the steam of the Steam
Disinfector Polti, HPMed is also able to
eliminate smells.
Instructions for use: Fit the disposable bottle
into
the
delivery
instructions
in
paragraph
BOTTLE OF HPMED".
Switch
on
the
machine
manufacturer's instructions. Once the system
is ready, distribute the steam and HPMED.
Mixed with the steam, the product will
normally dry within 30 seconds to one
minute, depending on the environmental
conditions.
Warnings: Keep out of the reach of children.
Do not ingest. In case of contact with eyes,
rinse with plenty of water and seek medical
advice.
HPMED is a cleaning product for hard
surfaces.
Contains <5% non-ionic surfactant. (EEC Reg.
648/2004)
PREPARING FOR USE
• Connect the monoblock (9) to your steam
generator, as described in the user's
STEAM DISINFECTOR
contained
in
this
by
pathogenic
device
following
the
"DISPOSABLE
following
the
manual for the generator.
• Fit the disposable bottle into the delivery
device
following
paragraph
"DISPOSABLE
HPMED".
DISPOSABLE BOTTLE HPMED
• Pull off the cap (D) of the disposable bottle
(C) with a back-and-forth movement as
shown in fig.1 to remove the HPMED take-
up stopper.
• Screw the disposable bottle (C) to the
Steam Disinfector delivery device (fig.2).
Do not refill the disposable bottle.
INSTRUCTIONS FOR USE
• Switch
on
your
described in the user's manual.
• Connect the Steam Disinfector and wait
until the heating light goes out (3).
• Should
your
generator
regulator, regulate steam to medium.
• Press the steam delivery push-button (1) to
obtain a steam delivery from the delivery
device. The delivery lamp (3) will switch off
when the heating coil inside the nozzle
reaches the working temperature.
Note: the handle is fitted with a safety
switch (2) to prevent the accidental
activation of steam delivery by children or
people unaware of its function. Should the
appliance be left momentarily unguarded,
move the safety switch (2) to the off
position. To continue steam delivery, move
the switch back to its original position.
Note:
• While the device is in use, the delivery lamp
(3) lights up and turns off. This indicates
that the electrical resistor is starting to
work to keep the temperature in the
delivery device steady. This is a normal
occurrence, and it is therefore possible to
continue standard operations.
• BEFORE TREATING SURFACES, IT IS
ADVISABLE TO DIRECT THE FIRST JET OF
STEAM
ONTO
DOWNWARDS FOR APPROXIMATELY 30
SECONDS WITHOUT HOOKING UP THE
FITTING FOR THE DISPOSABLE BOTTLE
(C). THIS WILL ENABLE THE OPTIMUM
TEMPERATURE AND PRESSURE TO BE
REACHED.
7
the
instructions
BOTTLE
OF
steam
generator
have
a
flow
A
CLOTH
OR
in
as