Sharpening - Stihl FG 3 Manual De Instrucciones

9
By turning theknurled nut (8), adjust
N
the stop (9) until it lies against the
back of the cutter that is to be
sharpened (master cutter)
FG 3
8
4
10
Then turn theknurled nut a little
N
further until the tooth face presses
against the file and the stop
tube (10) lifts up from the stop
roller (4) by approx. 0.1 to 0.2 mm

Sharpening

Sharpening the master cutter
4
10
Sharpen the master cutter with 2 or
N
3 rapid file strokes from the inner to
outer edge of the tooth face
Check whether the stop tube (1) lies
N
against the stop roller (2)
If necessary, readjust the stop (3)
N
and advance saw chain. Check stop
position again
English
2
1
3
2
1
17