Phonic Powerpod 620 R Manual Del Usuario página 9

35. EQ IN and Indicator (Powerpods 740R only)
This button activates the graphic equalizer in which it accompanies.
The corresponding LED indicator illuminates when the EQ is
activated.
36. EQ Select Switch (Powerpods 740 R only)
This switch (featured on the Powerpods 740 R only) enables you
to select the way you utilize the pair of Equalizers on these models.
When the switch is in the uppermost position it enables you to use
the top equalizer for the Monitor signal, and the bottom equalizer
for the Main signal; the lower position allows the equalizers to each
be used for the mixer's Main 1 and 2 signals.
37. Phantom Power Switch and Indicator
When this switch is in the on position it activates +48V of phantom
power for the XLR inputs on channels 1 to 4, allowing condenser
microphones to be used on these channels. The corresponding LED
will illuminate when phantom power is activated.
38. Amp Select Switches
This switches control the activity of the built-in power amp, enabling
the user to alternate between the different signals which can be
processed by the built-in power amp and routed to the speaker
outputs on the rear of the device. This switch allows you to select
from: Main/Monitor – taking the monitor and main signals and
directing them to the appropriate speaker outputs; Main 1 / Main
2 – using the Main signal to feed the speaker outputs; and Bridge
– which combines the amplifiers' power and feeds it through the
Bridge output only.
NB. When using a mono bridge connection, do not connect a speaker to any
of the Main/Monitor A or B jacks, located on the rear of the mixer. Use the
"Bridge" speaker jack only.
39. Monitor Level Control
This rotary control allows the user to adjust the final signal level
sent to all Monitor outputs.
40. Main Level Control
This rotary control allows the user to adjust the final signal level
sent to the Main and Speaker outputs.
41. Level Meter
These level meters give accurate indications of when audio levels of
the Main and Monitor outputs reach certain levels. The 0 dB indicator
illuminates is approximately equal to an output level of +4 dBu. It
is suggested that users set the various level controls so that it sits
steadily between 0 and +3 (+6 on the 740 R). This will make full use
of audio while still maintaining fantastic clarity. The Powerpod 620 R
features a single dual 5-segment LED display, while the Powerpod
740 R features two single 5-segment LED displays – one for each
the monitor and main signals.
42. Limiters (Powerpods 740 R only)
These LED indicators illuminate when the power amplifier's built-in
limiters are activated, which effectively reduce signal levels when
they reach high levels that could prove to damage sound quality.
43. Power Indicator
This LED indicator illuminates when power of your Powerpod mixer
is activated.
POWERPOD 620 R / POWERPOD 740 R
30
31
37
36
32 33
43
39
42
41
40
38
34
35