Cleaning And Care; Solving Problems - Beper BF.570 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
Microwave oven Use instructions

CLEANING AND CARE

A good cleaning of the microwave oven allows to keep it safe, in good conditions and guaranty an optimal use.
Before cleaning the microwave oven turn the timer adjustment knob (1B) on 0 and disconnect the cord from the
socket.
Wait for each part of the microwave oven cool down, especially external ones, the doors and the heating ele-
ments.
For cleaning use a non abrasive sponge or a soft cloth, lightly damp with water, and non abrasive detergent.
Do never spray detergent directly on the microwave oven but on the sponge.
Clean inside the microwave oven after use with a lightly damp cloth.
Clean the turntable (5), the rotating ring (4) with water and non abrasive detergent.
All the external parts have to be cleaned with a lightly damp cloth.
Be very careful not to spill liquids into the holes inside the oven, in the openings of ventilation and external control
panel.
Clearing the microwave oven is very important especially after every use. Indeed food residues that are deposi-
ted inside the oven are dangerous because they can cause fires when lighting the oven.
The heating elements should not be cleaned, but if necessary remove the residues of food, but do never use
an abrasive sponge.
Unpleasant odors coming from inside the oven can be removed with lemon juice combined with a neutral de-
tergent.
Wipe each part of the microwave oven and its accessories before using the oven.

SOLVING PROBLEMS

In case of breakdown, before contacting the manufacturer or the Technical Assistance Center, check the fol-
lowing indications :
Interference of the microwave
oven with the reception of te-
levision
Low light
Steam builds up on the door,
warm air come out from ope-
nings
The oven is turned on acci-
dentally when empty
Problem
The microwave oven does not
turn on
The microwave oven does not
heat
The turnplate is noisy when
the mircowave oven is in use
It is possible that there is interference to radio or television for the operation
of the microwave. This is a phenomenon similar to that which may occur with
small appliances. This is normal.
While cooking in a microwave oven at low pressure, the oven light may de-
crease. This is normal.
During cooking it is possible that steam escapes from the food. Part of this
steam is expelled through the openings, but the vapors may accumulate on
cold surfaces such as door. This is normal.
Turning on the microwave oven when empty does not create any damage to
the appliance, but this is avoid.
Possible causes
The cord supply is not cor-
rectly connected to the so-
cket
The fuse blows or the circuit
breaker trips
Problem with the output ter-
minal
The door is not correctly
closed
The wheels are dirty or food
residue in the botton the mir-
cowave oven
19
Solutions
Disconnect from the socket, and connect
again after 10 seconds
Replace the fuse or reset the circuit breaker
(request the intervention of skilled personnel)
Check the outlet with another device
Close the door correctly
Please refer to the paragraph « cleaning and
care»
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido