KPS -TH10 Manual De Funcionamiento página 8

3
(1) Low battery
(2) Automatic power-off mark
(3) Display wet bulb temperature or dew-point temperature
(4) Temperature measurement unit
(5) Relative humidity measurement unit
(6) MEM, RAM position number
(7) Max-min
(8) Hold function actived.The screen freezes the current reading
3. OPERATION
When moving the meter from one atmosphere with extreme temperature or
humidity to another, you need to wait for its stability.
Press to start the meter and read the measurements displayed by °C or °
F . Press ºC/ºF to switch.
3.1 Dewpoint & Wetbulb
When starting the meter, the ambient temperature appears on the screen. To
obtain DP, press a first time DP/WB, and press DP/WB for a second time, WB
is switched. Press DP/WB a third time, to get the ambient temperature back.
A corresponding signal will be shown on the screen indicating DP and WB.
3.2 Holding
Hold the button Press
from displaying the measurements. When the
KPS-TH10 • Digital thermohygrometer
1
H O L D
2
DEW
POINT
WET
BULB
NOTICE
H
to freeze the current reading, and stop the meter
8 7
MAXMIN
ME M
8
6
5
4
function is actived,the