Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-2377-001.book Page 11 Thursday, February 26, 2015 9:55 AM
To switch off the inspection camera, press the On/Off button
2 again.
If no button is pressed on the inspection camera for approx.
20 mins, it will automatically switch off to save the batteries.
Regulating the Illumination Light in the Camera Head
To brighten the camera image, you can switch on the illumina-
tion light 9 in the camera head and adjust the brightness.
The brightness can be adjusted in 4 stages (0 %, 25 %, 50 %,
100 %).
To switch on the camera illumination light 9 and to increase
the brightness, press button 4 repeatedly until the required
brightness is reached.
Do not stare into the illumination light 9 and do not di-
rect it at other persons. The brightness of the light can
blind the eyes.
To reduce the brightness and to switch off the camera illumi-
nation light 9, press button 4 repeatedly until the required
brightness is reached or the illumination light is switched off.
Magnifying the Image on the Display (Zoom)
Briefly pressing button 6 magnifies the image on the display
by a factor of 1.5 or 2.
Black-And-White Button
Briefly pressing button 3 switches the display between col-
our rendering and black-and-white rendering. Using black-
and-white rendering can, for example, improve the contrast.
Compass View with Reference Point (Up Indicator)
(see figure D)
Holding down button 3 takes you to the Compass View e.
When doing so, the yellow reference point (Up Indicator)
shows you where the physical "up" position is in the image.
Note: Restricted function when mirror 18 is mounted and/or
when camera cable 7 is aligned vertically.
Status Bar
The status bar a is shown on the display for approx. 2 seconds
after every button press. It shows:
– the selected magnification (b)
– the selected brightness (c)
– the charging condition of the batteries (d).
Working Advice
Check the area that you want to inspect and pay particular at-
tention to obstructions or hazard areas.
Bend the camera cable 7 in such a manner that the camera
head can be easily inserted into the area subject to the inspec-
tion. Carefully guide the camera cable in.
Adjust the brightness of the illumination light 9 so that the im-
age can be seen well. For heavily reflecting objects, as an ex-
ample, less light will provide a better image.
When objects to be inspected are represented unsharp, re-
duce or increase the distance between camera head 8 and ob-
ject.
Bosch Power Tools
Maintenance and Service
Maintenance and Cleaning
Do not immerse the hand unit 1 into water or other fluids.
Keep the inspection camera clean at all times. Clean the in-
spection camera and all auxiliary aids particularly thorough af-
ter having worked in areas with substances that are hazard-
ous to one's health.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Especially clean the lens 10 of the camera regularly and pay
attention for any lint.
After-sales Service and Application Service
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the inspection camera.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
English | 11
1 609 92A 122 | (26.2.15)
Publicidad
Tabla de contenido
