Vitamix ON-COUNTER Manual De Uso Y Cuidado página 23

Problems:
• Display window reads
"CORRUPT DATA"
• D isplay window reads "THERMAL
SENSOR FAILURE"
• M achine stops in the middle
of its blend cycle and resets;
display window reads
"VITAMIX GENERAL PROGRAM"
then "READY"
• I f the machine has overheated:
The motor will stop and
the message "MOTOR HAS
OVERHEATED REMOVE THE
CONTAINER, THEN PRESS START,"
will scroll across the display
window, while the words
"HOT SHUTDOWN" will remain
in the display window alerting
you of the problem.
If you cannot fix your machine with these suggestions, technical help is available
by calling Vitamix® technical support at 800-886-5235. If you purchased your
equipment outside the U.S.A., contact your local Vitamix Distributor or telephone the
Vitamix International Division at +1.440.782.2450 or email international@vitamix.com
for a distributor in your country. For online help, visit www.vitamix.com/foodservice.
Possible Actions:
Turn the machine off and on
again to reset the programming.
Call Vitamix technical support.
a. P lug the machine into its own
power supply.
b. M ake sure the machine is not running
on a long extension cord.
Remove the container, shut the cover
door and press the Start/Stop button
and run the machine for two minutes.
When the motor is cool, "READY"
will appear in the display window.
23