BH Tecnovita HairSonix YU700 Instrucciones De Uso página 13

Use
1. Plug the adaptor (E) into the mains socket (220V)
2. Plug the adaptor (E) to Hairsonix.
3. Select the intensity between low (upper lights on) and high (upper and lower
lights on).
Beginning a session
• Before beginning a session, remember to remove makeup and all accessories such as
necklaces, earrings, contact lenses, piercings, etc. Make sure that your hair is clean.
• Always apply plenty of gel on the area and start by slowly sliding the head without
pressing and keeping the same movement.
If you need to purchase ultrasound gel, you can find it in the shop where you
purchased HairSonix or at our website: www.tecnovita.eu
For correct, safe use of HairSonix
For correct and safe use of HairSonix, you should keep the following application times
in mind:
• Per daily session: 10 minutes maximum.
By session we mean the application of HairSonix on different work areas in the same
day.
• Between sessions: 48 hours minimum.
By "between sessions" we mean the rest time between each session.
E.g.: In one week, a session schedule would be: Monday, Wednesday, Friday and
Sunday.
• Every 24 sessions (approx. 1 and a half months of treatment): rest 1 and a half
months.
After this rest period you can repeat the treatment.
VERY IMPORTANT
*** Nunca sobrepase los tiempos de aplicación ( 10 minutos por sesión en total al
finalizar el día). Exceeding recommended applications can cause fatigue and skin
irritation. Only short applications should be applied to allergic or sensitive skin.
*** And, above all, respect the rest period of 48 hours between sessions. This is the
time that your skin needs to rest.
13