Publicidad
• Open the belt buckle (press the red button).
• Ensure the baby is placed correctly in the seat, its back firmly
against the back of the seat. The ergonomic shape of the shell
ensures the baby does not slump in the seat.
• The shoulder belts must fit correctly over the shoulders of the baby (D).
• Slide both plastic tongue sections together (A).
• Insert both tongue sections in the buckle, you will hear a loud click
locking them in position (A).
• Pull the adjuster belt at the front of the shell tight, so that the child is
firmly secured with the harness belt (the belt system).
a
GB
SECURING THE BABY
b
Adjusting the harness belt.
• The harness belt (belt system) must be adjusted to suit your child's
body (D).
• The harness shoulder belts must be threaded through the slots
nearest to the shoulders of the child (C).
Adjust the harness shoulder belts as follows.
• Pull the shoulder belts through the slots in the cover and the shell (D).
• Thread the shoulder belts through the correct slots in the shell
and cover (C).
Alter the adjuster belt (belt system) as follows:
To loosen:
• Press the adjuster button at the front of the shell (B).
• Pull both harness shoulder belts simultaneously towards you (B).
To tighten:
• Pull the adjuster belt at the front of the shell tight until the harness belt
lies firmly against the child.
• The end of the adjuster belt can be fastened on to the hooks at the
front of the shell.
c
16
d
Publicidad
