Installation; Wiring - Extel MOMBO Instrucciones De Uso

9. Camera direction adjustment holes

4. INSTALLATION

Note:
otherwise the videophone will emit piercing feedback noise (Larsen effect)
2. Tip the outside station forward (2)
4. Place a silicone seal (4) between the shield and the wall to avoid water running inside. (
based silicone (vinegar smell))
5.
Important:
Tip: we recommend passing the cables through a protective sleeve to protect them from impacts and the weather.
2. Connect the two outside station wires and the 2 power supply wires (ch. 5.a) according to the wiring diagram
Caution: be sure to respect the polarity

5. WIRING

as 230 electric wires
Caution: never double wires to increase their size.
Wires to use for the monitor/outside station connection and power supply:
th wires up to 25 m
2
intercom and opening controls (door opener and automation).
Respect the polarity between the screen and the outside station (no polarity to follow for the door opener con-
trol).
CFI EXTEL MOMBO - 12/2014
GB3