ECG RM 200 Manual De Instrucciones página 23

Licuadoras de mano
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47
HAND BLENDER
SAFETY INSTRUCTIONS
Please read carefully and keep for future reference.
Warning: The safety measures and instructions contained in this
manual do not include all potential conditions and scenarios. The user
must understand that common sense, caution and care are factors
that cannot be integrated into a  product. Therefore, these factors
shall be ensured by the user/s using and operating this appliance. We
are not liable for damages caused during shipping, by incorrect use,
voltage fluctuation or the modification or adjustment of any part of
the appliance.
To protect against the risk of fire or electric shock, basic precautions
must be taken while using electrical appliances, including the following:
1. Make sure the voltage in your outlet corresponds to the voltage
provided on the appliance label and that the socket is correctly
grounded. The outlet must be installed in accordance with
applicable electrical codes according to EN.
2. Do not operate blender with a damaged cord. All repairs, including
cord replacements, must be carried out at a  professional
service centre! Do not remove the protective covers from the
appliance; there is a risk of electric shock!
3. Protect the appliance against direct contact with water and other
liquids, to prevent potential electric shock.
4. Do not operate the immersion blender outdoors or in a  moist
environment and do not touch the cord or appliance with wet
hands. Risk of electric shock.
5. Close supervision is necessary for operating the immersion blender
near children!
6. Do not leave the immersion blender running unattended.
7. Hair, fingers or parts of clothing shall be kept far enough from the
moving parts of the appliance. Do not place any tools or hands into
the bowl while blending, risk of injury or damaging the appliance.
You may use the spatula only if the blender is switched off.
8. Before starting the device, set the bowl in its proper position, attach
the blade to the motor and then plug the cord into the outlet. This
reduces the risk of injury.
GB
23

Publicidad

Tabla de contenido
loading

Tabla de contenido