Cosmedico Rubino Manual De Instrucciones página 12

 Special materials, which fade in case of light (for example painting), should also not
be too long in the UV-light of the appliance.
 It is possible that lamps will flicker in new installations, or that moving shadow
effects occur. These have no influence on the tanning performance.
CHANGING THE LAMPS
If tanning results are decreasing a lot (mostly after 300 hours use) you may change the
lamps. USE COSMOLUX Rubino 15W/31369or an alternative 15W lamp with UV code
range 15-0-(8-11)/(6,3-8,5)
1. make sure the Rubino is switched off and the power cord has been taken out of
the socket
2. remove the covers ( I on drawing 1) by pushing them in the direction indicated
on the plastic
3. remove the tubes by turning them slightly and carefully
4. put in the new tubes and fix them by turning them into opposite direction
5. put the covers back in place
Parts and functions see drawing 1
A Release button to open the panels
C Timer with knob
D Stand
E Turning point with fixation knobs
F Safety switches (turning off the lamps when the panels are accidentally closed during
operation. (NO STANDARD PROCEDURE). See instruction manual.
G Spring buttons to release the panels easier
H Lamps 15W Rubino (31369)
I Lamp covers
Different positions to adjust with fixation knob E
12