Operating Instructions; Safety Instructions - AXXAIR CC-X22 Serie Instrucciones De Manejo

- 13 -
ENGLISH
INNOVATIVE ORBITAL SOLUTIONS

Operating Instructions:

Safety instructions :

WARNING! In order to reduce all risks of possible body harm when using electric equipment. PLEASE
READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THE MACHINES. Keep these safety
instructions.
The machine must only be used by qualified technicians who have been trained to use the equipment.
This machine should be used only for the job for which it was designed.
Keep your working area tidy. Untidiness increases the risks of accidents.
Consider the work area environment in which you use the equipment. Do not expose the electric tools to
the rain. Do not use them in a humid or wet environment or in the presence of inflammable gases or
liquids. Always work in a well-lit place.
Protect yourself against electric shocks. Avoid being in touch with areas related to the ground.
When not in use, tools should be stored in a dry, secure place.
Dress properly with clothes adapted for the job. Do not wear loose clothing or jewellery. They could be
caught up in moving parts.
Use the safety glasses provided with the machine. You can also use a face or dust mask if the cutting
operation is dusty.
Do not abuse the cable. Never carry the machine by the cable or yank it to disconnect from plug.
Keep the cable away from heat, oil and sharp objects. Inspect cable regularly and if damaged, have it
repaired by authorised after-service facility.
Secure the machine on a workbench or into the ground via the security leg in order to work safety.
Maintain tools with care. Keep the machine clean for a better and safer performance. Follow instructions
for lubricating and changing accessories.
Unplug the machine when not in use, before maintaining, and when changing accessories (e.g. blades).
Avoid unintentional starting. Do not carry plugged-in tool with finger on switch. Be sure the switch is off
when plugging in.
Use appropriate extension cords. When using the machine outdoor, use only extension cords intended for
outdoor use.
Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired.
Check if your machine is damaged. Before using the machine ALWAYS check that no parts have been
damaged in order to be sure that it can perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation. Damaged parts should be properly repaired or replaced by an authorised after-service centre.
DO NOT USE MACHINE IF DAMAGED.
Use AXXAIR accessories only.
Repairing by experts only. The machine is in accordance with the relevant safety rules.
If you are using an electric motor make sure that the voltage is the appropriate.
If you are using a pneumatic motor, check the pressure of the compressed air (6 bars). Output: see
relevant chapter. The use of an oil filter is MANDATORY; you can obtain it on request.
Always check that the handle and the safety pedal has been provided with the machine.(for a pneumatic
machine only).
Use appropriate means for handling the machine.
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363