Lubricants; Maintenance And Repairs; Environmental Protection - AXXAIR CC-X22 Serie Instrucciones De Manejo

INNOVATIVE ORBITAL SOLUTIONS

14. Lubricants:

Warning: Take particular care when using a liquid lubricant on
the electric cutting motor. Electric motors are not watertight and
any contact with a liquid risks causing damage to the motor and
putting the user's safety at risk.
AXXAIR offers two types of lubricants made for cutting purposes:
cutting oil Ref. CCLUH and the cutting paste Ref. CCLUP.

15. Maintenance and Repairs:

-
Maintenance operations should be done by qualified personnel using original replacement parts.
- Before starting, it is necessary to disconnect all power supplies.
The machine and its accessories should always be stored and transported in their original
-
packaging.
It is essential to keep the machine clean in order to optimize its performance.
-
The machine should be cleaned with the aid of the brush provided in the bag and lubricated after
-
each usage.
Don't leave the machine in a detrimental, dirty, or humid environment.
-
It is essential that foreign bodies not be placed in the swivelling system of the machine.
It is recommended that the brush provided be used to clean the machine.
Clean thoroughly and check that there are no cuttings before doing any work on the machine.
We recommend a disassembly and lubrication of moving parts by qualified personnel every year.
We offer a flat-rate maintenance contract with our workshops. For more information contact us.
Changing the vanes in pneumatic
cutting motors:

16. Environmental protection

AXXAIR packaging is 100% recyclable. Used mechanical parts and electrical equipment contain large
quantities of valuable raw materials that can be also sent for recycling.
For European countries only: Do not deposit electrical equipment in household waste! In pursuance of
European directive 2002/96/CE on recovery and recycling of waste electrical and electronic equipment
(WEEE), and its translation into national legislation, electrical apparatus must be collected separately and
undergo environmentally-friendly recycling.
Join experience
ENGLISH
Never be clean with pressurised air.
Motor vanes
Ref. MO10-16
Filter and silencer
Ref. MO10-35
MO10-36
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Changing the carbon contacts in
electric cutting motors:
Motor carbon
Ref. MS10-Co10
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 21 -