Tabla de contenido
Publicidad
Please wait
Throttle
This flight mode requires low
throttle before starting motors
6.1.2
Alertas de reparación
Uneven
Las siguientes alertas indican un error del sistema que requiere reparación. Utilice la app para enviar un ticket de
Move Solo to a level surface
problema a Asistencia de 3DR o comuníquese con un Centro de servicio Solo autorizado para reparar a Solo y
borrar la alerta. Puede haber un error en la palanca de control durante el vuelo o antes del despegue. Si se recibe
un error de la palanca de control durante el vuelo, Solo regresará al inicio y aterrizará.
Service
Use 3DR Solo app to log a trouble
ticket with customer support
6.2
Errores durante el vuelo
Durante el vuelo, el mando vigila la señal del GPS, la señal del mando, el nivel de batería de vuelo y el nivel de
batería del mando de Solo.
6.2.1
Límite de altitud
Si Solo alcanza el límite de altitud durante el vuelo, mantendrá y no excederá dicha altitud y el mando mostrará la
siguiente alerta.
6.2.2
Conexión de la app
El mando mostrará las siguiente alertas en forma de banner en caso de que la app Solo se conecte con Solo o se
desconecte de este. Recomendamos que tenga una conexión activa con la app de Solo en todo momento durante
el vuelo. Consulte la Sección 2.6 para conectarse con la Wi-Fi de Solo con la app. Solo no regresará al inicio si se
pierde la conexión con la app durante el vuelo, consulte la Sección 6.2.4 para obtener más información sobre la
pérdida de GPS.
Compass
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Please calibrate compass using
the 3DR Solo app
ARMING ALERTS
Compass error
User asked to use Solo app to calibrate.
Alert persists until:
User completes calibration using the app (sys then continues sensor check)
Powers off controller, or Solo
too high
Controller auto-shutdown
Calibration
error
Level
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Please restart Solo
Please calibrate level
using the 3DR Solo app
Level error
Figura 6.1.1.4: Mando - Alerta de error de calibración
User is asked to use Solo app to calibrate
Alert persists until:
User complete calibration using the app (sys then continues sensor check)
Powers off controller, or Solo
surface
Controller auto-shutdown
Calibrating
Solo
Sensor
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Please wait
Please try and restart Solo
Catch-All
Remaining rare but problematic APM errors
will be captured under a catch-all for
logging trouble tickets
required
Control stick
Calibrating
compass
Contact 3DR customer support
Please wait
Figura 6.1.2.1: Mando - Alertas de reparación
Unknown
Throttle
too high
Battery % not be accurate
This flight mode requires low
throttle before starting motors
IN-FLIGHT ALERTS
Uneven
surface
Move Solo to a level surface
Maximum
Preset max altitude reached
Figura 6.2.1.1: Mando - Alerta de límite de altitud
Service
required
Use 3DR Solo app to log a trouble
ticket with customer support
Crash
Press
GPS
Switching to manual control
Level
error
Powers off controller, or Solo
error
Controller auto-shutdown
Please calibrate level
using the 3DR Solo app
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Altitude calibration
Level error
System self-calibrates altitude after altitude disparity
User is asked to use Solo app to calibrate
Alert persists until:
Alert persists until:
System self-calibrates (sys then continues sensor check)
User complete calibration using the app (sys then continues sensor check)
Timeout: after 1 minute (?) (results in "sensor error" screen)
Powers off controller, or Solo
Sensor
error
error
Controller auto-shutdown
Please try and restart Solo
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Altitude calibration
Sensor error screen
System self-calibrates altitude after altitude disparity
For sensor errors requiring user-initiated restart
Alert persists until:
System self-calibrates (sys then continues sensor check)
Timeout: after 1 minute (?) (results in "sensor error" screen)
Control stick
error
error
Contact 3DR customer support
IN-FLIGHT ALERTS: CONTROLLER RELATED
Control sticl error
Compass error
User is asked to use Solo app to calibrate.
Persists until:
Alert persists until:
?
Controller starts with stick values in range.
User completes calibration using the app (system then continues sensor check)
Unknown
battery
User powers off controller, or Solo
Control stick
Control stick
error
Controller auto-shutdown
Battery % not be accurate
Solo will return home
Solo will return home
Note: Artoo will not assume the same error is present on
Dismiss
restart, and will run a fresh check when connected to Solo.
Battery unknown
Compass error
Displayed if Artoo is powered on with a battery has an
User asked to use Solo app to calibrate.
ID resistor unknown to Artoo. (Not logged in current software version's index.)
HAPTIC: Strong feedback, 40 millisecond pulse
Alert persists until:
?
After Solo is disconnected, Artoo should display "waiting for Solo"
User completes calibration using the app (sys then continues sensor check)
Controller
Powers off controller, or Solo
battery
Controller auto-shutdown
Solo will return home
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Dismiss
Level error
User is asked to use Solo app to calibrate
Alert persists until:
User complete calibration using the app (sys then continues sensor check)
Signal
Powers off controller, or Solo
Controller auto-shutdown
Maximum Altitude
User is told that maximum altitude has been reached
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Vehicle is not able to go higher than max altitude
Alert appears once per flight and is triggered at 100 FT by default.
Alert persists until:
altitude
TIMEOUT: 5000 milliseconds
HAPTIC: Double buzz 40-40 millisecond
Catch-All
Remaining rare but problematic APM errors
will be captured under a catch-all for
logging trouble tickets
Controller
Emergency landing started
Crash Detected
User can use app to log a support ticket
Alert persists until:
User presses A
HAPTIC: Quad buzz: 40-40-40-40
detected
Solo SFX: Start lost call ping if more than 10 m away
to dismiss
GPS signal lost (Switches to FLY: Manual)
Alert persists until:
TIMEOUT: 3000 milliseconds
HAPTIC: Triple buzz twice: 30-30-30, 30-30-30
lost
12
FLIGHT BATTERY
48
GPS signal recovered
(No advanced mode, Manual mode not set to A or B)
Switches to FLY when GPS is recovered
Manual camera controls error
Alert persists until:
TIMEOUT: 3000 milliseconds
Controller auto-shutdown
Note: Artoo will not assume the same error is present on
restart, and will run a fresh check when connected to Solo.
Sensor error screen
For sensor errors requiring user-initiated restart
Control sticl error
Persists until:
Controller starts with stick values in range.
Battery unknown
Controller Value out of Range
Displayed if Artoo is powered on with a battery has an
User is asked to contact customer support
ID resistor unknown to Artoo. (Not logged in current software version's index.)
Alert persists until:
HAPTIC: Strong feedback, 40 millisecond pulse
TIMEOUT: 5000 milliseconds
After Solo is disconnected, Artoo should display "waiting for Solo"
go to persistent hint-box message
error
error
(persistent until reboot)
RC Failsafe
Controller signal lost, RTH screen
Alert persists until:
TIMEOUT: 5000 milliseconds
signal lost
RC Signal Recovered
User can press Fly to recover
Alert persists until:
User presses Fly and enters Fly mode
HAPTIC: 40millisecond so user is aware that they can take control
recovered
RC Failsafe (No GPS)
Controller signal lost,
emergency land screen
Alert persists until:
TIMEOUT: 5000 milliseconds
signal lost
FLY
Camera paddle and dial failure
Alert triggered on input error on the paddle
HOME
or tilt speed dial potentiometers
324
TIMEOUT: 5000 milliseconds
FT
ALTITUDE
%
84
FT
12
Return
FLIGHT BATTERY
48
%
Contro
Contact 3DR Su
33
Publicidad
Tabla de contenido
