Yamaha YZ Power Tuner Manual Del Propietário página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 153
Engine control settings (SETTING function)
Ignition timing MAP display
Displays the adjustment value for each
area.
[SLCT All] tab
Selects the adjustment values in all of
the areas to be increased or decreased
together.
[CLR All] tab
Selects the adjustment values in all of
the areas to be reset to 0.
[BACK] tab
Switches to the EDIT screen.
3. Select the area that you want to adjust
using the "
/
and then push the set button.
The value in the selected area will flash
2 times.
4. Change the adjustment value using the
"
/
" button.
The adjustment range for each area is
from –9 to +4.
For the engine speed and throttle posi-
tion values of each area, refer to the fol-
lowing illustrations.
/
/
" button,
Engine speed
1. Low engine speed
2. Medium engine speed
3. High engine speed
Throttle position
1. Small opening angle
2. Medium opening angle
3. Large opening angle
TIP
To advance the ignition timing, change the
G
adjustment value to a positive (+) value. To
retard the ignition timing, change the adjust-
ment value to a negative (–) value.
The difference between the adjustment val-
G
ues of adjacent areas must not be exces-
sive.
The
difference
adjustment values of adjacent areas should
be within ±3.
1
2
3
3
2
1
between
the
14

Publicidad

Tabla de contenido
loading

Tabla de contenido