User And Maintenance Instructions; Water Treatment - Weka 593 Serie Instrucciones De Montaje

5. User and maintenance instructions

When using/inspecting the pool, only the existing ladder in the plant room or the pool stairs available as
accessories must be used.
When using the portable ladders, ensure that they are securely positioned.
Max. water filling level: 1.03 m
If you have any questions, please contact the manufacturer:
When installing the electrical and water systems, please read the enclosed "Electrical installation
instructions, II, item no.: 800.0286.12.24" and "Water installation instructions – Appendix 1".
Care and maintenance
The corner connections are hot-dip galvanised and, as a rule, require no further protection.
Zinc coatings have a so-called "self-healing" effect and thus even out minor scratches and cuts in the
galvanised material.
However, should the material show the first signs of rust, due to the manufacturing, storage, transport and
installation processes, we recommend using a high-quality zinc spray. Please consult a specialist company.

5.1. Water treatment

General
Working with chemicals
The following points must be noted in order to guarantee safe handling of our products:
The various chemicals must never be mixed in concentrated form. Use only appropriate containers for pre-
mixing with water. Always add the chemicals to the water, never the other way around.
All the chemicals should be stored so that they are dry and cool and in their original packaging.
Follow the application instructions on the packaging.
All the chemicals must be stored out of the reach of children and unauthorised individuals.
Our packaging is 100% recyclable.
TC = Toxic classification 4 + 5: Observe warnings on the packages.
Useful information, suggestions
➢ If the pool is very dirty, base suction cleaners are available. This reduces the load on filter systems and
protects the environment.
The pH value:
The most important factor in maintaining clean swimming pool water is the pH value. It influences all aspects
of the pool water. The first step is always: check the pH value (pH/chlorine or pH/oxygen test utensils)! The
ideal range is between 7.0 and 7.4. If the pH value is too high, this can lead to skin and eye irritations. It may
also render other maintenance measures ineffective. If the pH value is too low, this can cause corrosion of
your fittings.
Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
- WEKA Holzbau GmbH
Johannesstr. 16
17034 Neubrandenburg, Germany
Tel.: +49 (0)395 42908-0*
Fax: +49 (0)395 42908-83*
© Copyright HRB 3662
25