Weka 505 Serie Instrucciones De Montaje página 8

The sauna may be installed in reverse.
In order to prevent the glass door from sagging, screw down the fittings tightly using the Allen key.
The door fittings are to be checked when the cabin has been used repeatedly and adjusted if required. The
screws for fastening the door fittings and door handles are also to be tightened after the cabin has been
used repeatedly.
Should the wood fibreboard of the rear wall and ceiling panels show any unevenness or slight undulating
deformities, these shall have no negative influence on the use, appearance or the thermal efficiency of the
cabin and are therefore not grounds for complaint.
Guarantee provisions from weka Holzbau GmbH
We provide you with a five-year functional warranty beginning on the date of delivery. The warranty is in
accordance with the conditions below, but it applies only to the wood parts of our products (hereinafter
referred to as the "weka product"). Any associated components or parts of the weka product made from any
materials other than wood are not covered by the warranty. Within the warranty period, defective parts or
missing parts of the goods or the goods themselves will be replaced at our discretion. The warranty covers
only free replacement of the defective or broken piece of wood. The warranty does not include consequential
or additional costs, in particular no delivery, assembly or rebuilding costs.
The warranty is void if:
- The installation instructions were not properly followed.
Changes (additions or conversions) were made to the product compared to the installation instructions.
-
The stated load limits (e.g. snow load etc.) were exceeded.
-
The weka product was not given a proper base (foundation / base plate, etc.), especially in the event
-
that construction rules are violated.
- The wood received insufficient or no care (maintenance: wood protection agent, wood stain etc.).
Wind speeds above force 7, natural disasters or violent impacts have caused the damage to the weka
-
product.
- The defect comprises typical wood discolouration, cracking, warping, shrinkage, swelling or similar
normal changes that are within the nature of the wood as a material.
Warranty claims may only be submitted in conjunction with the original packing list and the original proof of
purchase. Claims must be made in writing, by fax or by email within the warranty period. To be eligible for
the warranty, you must provide prompt notification of the defect or damage through orderly presentation of
the damage in pictures and text.
Warranty claims must be sent to:
weka Holzbau GmbH, Johannesstraße 16, DE-17034 Neubrandenburg
Fax: +49 (0)395 42908-83; email: info@weka-holzbau.com
Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau GmbH
will carry out the following services for you:
Installation means putting together (assembling) the individual parts of the goods supplied according to the
instructions. It does not include painting or delivery and installation of accessories and accessory parts.
Electrical connections are not included in the assembly services.
The items to be installed must be located at the installation site/location/base area. Transport of the item or
the individual parts over a distance greater than 5 m or to another level is not included in the assembly price
quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 "Level tolerances in building construction", tab.
3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations prior to
installation. The substrates / floors / foundations constructed or selected by you must be suitable for the
installation.
Technische Änderungen vorbehalten! Alle Maße sind ca. Maße!
7
© Copyright HRB 3662