Publicidad
10.
ON timer setting
• Press the SET button will activate the on timer function.
• Set the desired on time by pressing the SET button continuously. If the timer is
set to 7.30am, the air conditioner will turn on at 7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
11.
Sleep mode setting
• Press the SLEEP button will activate the sleep mode function.
• This is an energy saving option. When the
unit is operating under cooling mode, the
set temperature is increased by 0.5°C after
the first half an hour, another 0.5°C after
the second half an hour and 1°C after the
following 1 hour.
• When the unit is operating under heating
mode, the set temperature is decreased by
1°C after the first half an hour, another 1°C
after the second half an hour and 1°C after
the following 1 hour.
• This function is available under COOL, HEAT and AUTO mode.
12.
Personalize setting
• Press
and hold for 3s, then
and
.
• Set the desire setting, then leave the handset for 4s without pressing any key
and it will save the setting into the programme.
• Press
once to activate the P1 setting, press again to cycle between P1 and P2.
• Press any key to deactivate the personalize setting.
13.
Temperature setting
• To set the desired room temperature, press the + or -- button to increase or
decrease the set temperature.
• The temperature setting range is from 16°C to 30°C (Optional setting 20°C
to 30°C).
• Press both buttons simultaneously to toggle + and -- from °C to °F setting.
OM-G17-0808-Daikin
will blink. Press again to cycle between
2
2
+2 C
+1 C
- 1 C
- 2 C
- 3 C
0
0.5
1
1.5
2
8/26/08, 2:02 PM
Publicidad
