Using The Vacuum Cleaner - Lumme LU-3209 Manual De Instrucciones

USING THE VACUUM CLEANER

 Pull out the wire to suitable length; insert the plug into power socket.
 Then press the switch to run the machine.
 The vacuum cleaner begins to work.
 The part, which can adjust wind volume, is on the handle.
ATTENTION: Don't extend the cable beyond the RED mark.
REPLACING THE DUST-CUP

When the dust reach to the 1/4 level in the dust-cup, it means dust-cup is full. At this moment, dust-cup should be emptied and the filter should be washed.

Open the dust-cup as showing in the picture.
10
LU-3209