Product Presentation And Scope Of Product; Composition - Tecno-gaz B-MAX 4700S3 Manual Del Usuario

ENGLISH
PRODUCT PRESENTATION AND SCOPE OF PRODUCT
Dental whitening lamp " B‐MAX " is intended for the dental sector.
The sole purpose of " B‐MAX " is to polymerize photohardening dental materials.
The lamp emits intense light radiation.
The operator who uses the " B‐MAX " must be suitably qualified to do so.
The operator should have received the necessary training in using the lamp correctly
and must be familiar with the position of all the controls:
• for positioning the lamp
• for switching on and off and for the setting functions.
B‐MAX should be used only to polymerize photohardening dental materials with
photoinitiator in the wavelength band between 410 and 490 nm.
Do not use with other types of material or for applications outside the oral cavity.
If you have any doubts about the type of material, you should contact the manufacturer
of the compound.
Illegitimate use of the instrument and operator negligence can cause injury to people
and damage to the environment and property; TECNO‐GAZ will not be held liable for
any such injury or damage.

COMPOSITION

B MAX has been made with the most advanced
andup‐to‐date technologies.
B MAX generates a light with a maximum power of
1600mW/cm2. The minimum treatment time is 5
seconds.
The dentist can select the most suitable program
for his/her treatment.
List of components
1 Hand piece
2 Battery charger stand
3 Power supply unit
4 Battery
5 Optical fibre
6 Protective screen
Fig. 1
8