Bodum BISTRO 11870 Instrucciones De Uso página 6

Ocultar thumbs Ver también para BISTRO 11870:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
2. Then discard the water after heating. Repeat
this process once more, make sure to let the
product cool down each time or it will fail to
function until it has sufficiently cooled down.
FROTHING
1. Connect the power cord plug to a suitable
MILK
power outlet.
2. Open the lid and attach the whisk onto the
rotating shaft.
3. Fill in cold milk. The milk level must be
between the mark "MAX
4. Put the lid on firmly by pushing it down
slightly.
5. Place the milk frother on the power base.
6. Switch ON the product and the button will
light up. The product will begin frothing.
7. The temperature of milk will reach approx.
70°C around 1 minute and the product will
stop operating when ready. If the frothed
milk is not removed and the temperature of
the milk falls below 50°C, the milk frother will
start operating again automatically. You can
also press the ON/OFF button to turn OFF the
product.
8. Remove the milk frother from the power
base and open the lid.
9. Then pour the milk from the milk frother.
NOTE: If you want to prepare more milk
froth, let the milk frother cool down for a few
" and "MIN".
9
minutes before further use. As long as the milk
frother is hot, the thermostat prevents it from
being used. You can rinse the inside of the
milk frother with cold water to accelerate the
cooling process.
HEATING MILK 1. Connect the power plug to a suitable power
outlet.
2. Open the lid and remove the whisk from the
rotating shaft.
3. Fill in milk. The milk level must be between
the mark "MAX" and "MIN".
4. Put the lid on firmly by pushing it down
slightly.
5. Place the milk frother on the base.
6. Switch ON the product and the button will
light up. The product will begin to heat.
7. The temperature of milk will reach approx.
70°C around 1 minute and the product will
stop operating. If the frothed milk is not
removed and the temperature of the milk
falls below 50°C, the milk frother will start
operating again automatically.
You can also press the ON/OFF button to turn
OFF the product.
8. Remove the milk frother from the base and
open the lid.
9. Then pour the milk from the milk frother.
10
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido