Control Elements - Waeco PerfectView M70L Instrucciones De Montaje

_RV-70.book Seite 24 Freitag, 15. Dezember 2006 4:15 16
Technical description
5.2

Control elements

The following control elements are located on the monitor:
No. in
fig. 0, Description
page 6
1 M
2 –
3 +
4 R
5
6 V1/V2
The following control elements are on the rear side:
No. in
fig. a, Description
page 6
1 Monitor bracket
2 Connection cable (with rotating cable bushing)
3 DIP switch for selecting mirror-image function (only on RV-24/N,
RV-27/N and RV-30 cameras):
1 = mirror image
2 = normal
24
Description
1. Switches the monitor on and off.
– Press briefly to switch on.
– Hold down for at least two seconds to
switch off.
2. Calls up the parameters to be set in the fol-
lowing order:
– Brightness
– Contrast
– Colour
– Volume
– Return
Reduces the value of the selected parameter.
Increases the value of the selected parameter.
Sensor window for the dimmer function
Switches from video source 1 to video source 2
(V1 and V2) and vice-versa.
PerfectView M70L