Original Operating Manual/Spare Parts List; Intended Use; Safety Instructions; Technical Data - Festool TCL 3 Manual De Instrucciones

GB
TCL 3
Original operating manual
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Do not throw in the household waste.
2

Technical data

Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging,
intermittent (NiCd, NiMH)
Charging times for BP, BPS
and BPC battery packs
Li-ion 1.5 Ah, 80 %/100 %
Li-ion 3.0 Ah, 80 %/100 %
NiMH 3.0 Ah
NiMH 2.0 Ah
NiCd 1.3 Ah
NiCd 2.4 Ah
Permitted operating tem-
perature range
Temperature monitoring
3

Machine features

[1-1] Holder for battery pack
[1-2] LED-Display
[1-3] Cable holder
[1-4] Battery pack
[4] Wall mount
The specified illustrations appear at the be-
ginning of the Operating Instructions.
8
Charger TCL 3 is suitable for
– charging battery packs: Protool BP, Festool
– internal use only.
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
TCL 3
future reference.
220 - 240 V ~
– The charger and power tool are not in-
50/60 Hz
10.8 - 18 V=
max. 3 A
approx. 0.06 A
approx. 25/35
min.
approx. 55/70
– Do not open the battery pack or the charger!
min.
– Prevent metal parts (e.g. metal chips) or
approx. 70
min.
– Do not use battery packs or chargers from
approx. 50
min.
– Protect the machine from moisture.
approx. 25
– Protect the cable from heat, oil and sharp
min.
approx. 50
– Check the plug and the cable regularly and
min.
-5 °C to
+ 45 °C
with NTC resis-
tor
4

Intended use

BPS and BPC (NiMH, NiCd, li-ion are recog-
nised automatically.)
The user is liable for improper or non-
intended use.
5

Safety instructions

Warning! Read all safety warnings
tended for use by persons (including
children) with limited physical, senso-
ry or mental ability or without suffi-
cient experience and/or knowledge,
unless they are supervised by a per-
son responsible for their safety or
have been instructed on how the
charger or power
used.Children should always be super-
vised to ensure that they do not play with
the charger or the power tools.
fluids from entering the charger!
other manufacturers!
edges.
should either become damaged, have
them replaced by an authorised after-sales
service workshop.
tool is to be