Specifications And Technical Data; Tool Air Fittings; Recommended Operating Pressure; Air Supply And Connections - Max TA116A/21-13 Manual De Operaciones

2. SPECIFICATIONS AND TECHNI-
CAL DATA
1. NAME OF PARTS
2 7
1
5
4 6
0
2. TOOL SPECIFICATIONS
PRODUCT NO. TA116A/22-9(CE) TA116A/21-13(CE)
HEIGHT 152mm (6'')
WIDTH 48mm (2'')
LENGTH 237mm (8'')
WEIGHT 1kg (2.2Ibs)
RECOMMENDED 5 to 6.9bar
OPERATING PRESSURE (70 to 100p.s.i)
LOADING CAPACITY 180 Staples
AIR CONSUMPTION 0.31 l (0.011ft
6.9 bar (100p.s.i.)
operating pressure
∗ The machine has been compactly designed in order to im-
prove operating weight balance.
3. FASTENER SPECIFICATIONS
PRODUCT NO. TA116A/22-9(CE)
CROWN 9.3mm (3/8'')
LENGTH 6 to 16mm (1/4'' to 5/8'') 6 to 16mm (1/4'' to 5/8'')
WIDTH 0.77mm (0.030'')
THICKNESS 0.55mm (0.0215'')
GAUGE 22
CROWN
LENGTH
THICKNESS

TOOL AIR FITTINGS:

This tool uses a 1/4" N.P.T. male plug. The inside diameter
should be 7mm (.28") or larger. The fitting must be capable of dis-
charging tool air pressure when disconnected from the air supply.
1 Frame
2 Cylinder Cap
3 Air Exhaust
Port
4 Slider Unit
3
5 Magazine
8
6 Trigger
7 Grip
8 Click Lever
9 Warning Label
(back side)
9
0 Outlet
152mm (6'')
48mm (2'')
237mm (8'')
1kg (2.2Ibs)
5 to 6.9bar
(70 to 100p.s.i)
150 Staples
3 3
) at 0.34 l (0.012ft ) at
6.9 bar (100p.s.i.)
operating pressure
TA116A/21-13(CE)
13mm (1/2'')
0.91mm (0.036'')
0.70mm (0.0275'')
21
WIDTH

RECOMMENDED OPERATING PRESSURE:

5 to 6.9 bar (70 to 100 p.s.i.). Select the operating air pressure
within this range for best fastener performance.
DO NOT EXCEED 6.9 bar (100 p.s.i.).
4. TECHNICAL DATA
NOISE
A-weighted single-event sound power level
TA116A/22-9 (CE) ------ LWA, 1S, d 82.4 dB
TA116A/21-13 (CE) ------ LWA, 1S, d 83.1 dB
A-weighted single-event emission sound pressure level at
work station
TA116A/22-9 (CE) ------ LpA, 1S, d 80.1 dB
TA116A/21-13 (CE) ------ LpA, 1S, d 80.3 dB
These values are determined and documented in accord-
ance with EN12549 : 1999.
5. VIBRATION
Vibration characteristic value
These values are determined and documented in accord-
ance with ISO 8662-11.
This value is a tool-related characteristic value and does not
represent the influence to the hand-arm-system when using
the tool. An influence to the hand-arm-system when using
the tool will, for example, depend on the gripping force, the
contact pressure force, the working direction, the adjust-
ment of mains supply, the workpiece, the workpiece
support.
6. APPLICATIONS
∗ Interior decoration
∗ Fastening Plywoods (for interior or furnitures)
∗ Upholstering chair, sofa, and other furnitures
3. AIR SUPPLY AND CONNEC-
TIONS
WARNING
Read section titled "SAFETY INSTRUCTIONS".
[AIR SUPPLY & CONNECTIONS]
Air compressor
Air hose
Used at 5 to 6.9 bar (70 to 100 p.s.i.)
6
TA116A/22-9 (CE)------1.50m/s
TA116A/21-13 (CE) ------1.86m/s
Uncertainty (K): 1.5m/s
Regulator
Oiler
Air filter
3-piece airset
2
2
2