Changing The Basic Settings; Care And Cleaning - BALAY 3EB6030L Instrucciones De Uso

Changing the basic
settings
Switching off without storing To exit the basic setting, switch off the deep fryer
the settings

Care and cleaning

Cleaning the deep fryer
82
The deep fryer must be switched off.
1.
Switch on the deep fryer.
2.
Within the next 10 seconds, touch the
symbol for 4 seconds.
c1
display and
G
3.
Touch the
symbol appears on the right-hand display
4.
Set the desired value by touching
control panel.
G
5.
Touch the
The setting is activated.
with the main switch. The changes of the settings
will not be saved.
Do not use high-pressure or steam jet cleaning
devices.
Caution, risk of burns! Wait until the appliance has
cooled down completely before cleaning it.
Caution, risk of burns! Never switch on the deep
fryer while the heating element is tilted up.
After draining the oil, remove coarse soiling in the
frying basin with kitchen paper.
Fill up the frying basin to the lower marking with
warm water and added detergent. Clean the frying
basin and the heating element using a soft brush.
Avoid scratching or scrubbing as this could cause
permanent scratches.
0
appears on the left-hand
on the right-hand display.
symbol repeatedly until the desired
symbol for 4 seconds.
G
+ –
or on the