Technical Specifications Of The Titronic; Notes To The Operating Manual; Intended Use; 500 Piston Burette - Xylem SI Analytics TITRONIC 500 Manual De Instrucciones

1

Technical Specifications of the TITRONIC

1.1

Notes to the operating manual

The provided operating manual will allow you the proper and safe handling of the product. For maximum security,
observe the safety and warning instructions in the operating manual!
Warning of a general danger:
Non-compliance results (can result) in injury or material damage.
Important information for device use.
 Refers to another part of the operating manual.
The menu screens shown in this operating manual serve as an example and may differ from what you see!
1.2

Intended Use

®
The TITRONIC 500 is a piston burette and suitable for the following applications:

Manual titrations with or without calculation of the result

Dosing

Preparation of solutions

It can be used as a dosing burette with the TitroLine

It can be used as a dosing or titrating burette in combination with the TitriSoft control software from
version 3.0
Each method allows for the setting of a variety of dosing and filling rates.
Up to 15 user methods can be memorised in the device.
Solutions to be used:
Virtually, any liquids and solutions with a viscosity of < = 10 mm²/s such as concentrated sulphuric acid may be
used.
However, one has to avoid the use of chemicals that may attack glass, PTFE or FEP or that are explosive,
such as hydrofluoric acid, sodium azide or bromine! Suspensions containing high solids percentages may clog or
even damage the dosing system.
Do not use the device in hazardous locations!
General:
The safety guidelines that are applicable to the handling of chemicals have to be observed under all
circumstances. This applies in particular to inflammable and/or etching liquids.
®

500 piston burette

®
7000 titrator
87