Technical Specifications - Velleman VDP250SC8M2 Manual Del Usuario

6
7 Prism rotation
8
8. Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. Clean the mirror on a weekly basis; the interior, the cooling fans, the filters and the gobos should be
cleaned monthly. Lubricate the gobo wheel twice a year.
8. There are no user-serviceable parts apart from the lamp and the fuse.
9. Contact your dealer for spare parts if necessary.
WARNING
THIS FIXTURE NEEDS PERIODICAL MAINTENANCE. DUST INSIDE THE UNIT MUST BE
REMOVED. VENTILATION HOLES MUST BE KEPT CLEAN. REPLACE THE LAMP BEFORE ITS END
OF LIFE. CONSULT LAMP MANUFACTURER. INSPECT ABOVE POINTS BEFORE EACH OPERATION.
NOT RESPECTING THESE WARNINGS MAY RESULT IN OVERHEAT OR FIRE AND WARRANTY
WILL VOID. READ THE MANUAL FOR ADDITIONAL SAFETY INFORMATION BEFORE USE.

9. Technical Specifications

power supply
power consumption
lamp
fuse
dimensions
total weight
max. humidity
operation temperature
max. ambient temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.hqpower.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
08.01.2010
Tilt -
0
64
160
Focus 0
max. 230 VAC~50 Hz
max. 350 W
1 x Philips MSD 250 W, 6700K (order code LAMP250MSD), 1 x Philips MSD
250, 8500K (order code LAMP250MSD/2PH), 1 x Xenpow MSD 250,
8000K (order code LAMP250MSD/2) or 1 x Sylvania MSD 250, 8500K
(order code LAMP250MSD/2SYL) – lamp not incl.
5 A, 250 VAC (5 x 20 mm) (order code FF5N)
535 x 295 x 180 mm
13.95 kg
50% RH
-5°C ~ +45°C
45°C
VDP250SC8M2
Push slider in order to move the mirror
vertically. Gradual mirror adjustment from one
-
of slider to the other (0-255, 128-center).
Mirror can be stopped at any position.
63 No function
159 Forwards rotation with increasing speed
255 Backwards rotation with increasing speed
255 Continuous adjustment for near to far
7
Rev. 04
©Velleman nv