FAR EB 310 Instrucciones De Uso página 14

OPENING THE TOOL (fig. f7)
Remove the battery (D) and the nail container closing cap (I),
disassemble the housing (O) of the tool, using a common
screwdriver of 4 mm to remove the 12 holding screws (P).
REMOVING AND REPLACING THE MICROSWITCH (fig. f8)
Extract the microswitch (Q), disconnect the wires and replace
the microswitch with the new one. A connection sequence
does not exist.
Place the microswitch (Q) inside the housing (R) oriented as
shown in figure, taking care of proper positioning of all wires, and
assemble the tool using the 12 screws (P) previously removed.
WARNING!
Only skilled, authorized personnel may perform
these operations.
Use only original spare parts.
f7
P
P
I
P
P
P
O
R
14
P
P
P
P
B
P
P
D
GB
f8
R
Q
Date 12-2009
Q
Q
EB 310 EB 310
Revision - 04