GCE druva MM90 STANDBY Instrucciones De Uso página 9

Replace all worn or damaged parts with original spare parts. Remember that gaskets, o-rings
•
and sealing surfaces must be clean and free from damage to work effectively.
Safety note-as part of the planned maintenance special checks should be made to ensure:
All changes (including removal and addition of parts) and extensions conform to the right code
of practice.
Changes in the vicinity of the installation do not affect the safety of the operation e.g. proximity
of electricity to fuel gases, oils and combustibles near to oxygen, illicit use of a pipeline as an
electrical conductor or as a support for other items.
10. SCHEME OF EXAMINATION
GCE RECOMMENDATIONS FOR A WRITTEN SCHEME OF EXAMINATION:
EQUIPMENT
1. High pressure
hoses
2. Copper & Copper
alloys Tailpipes
3. Stainless steel
Tailpipes
4. Hoses for other
duties
5. Pipe work
6. Safety Relief
Valve
7. Regulator
8. Manifold
9. Valves
EXAMINATION INTERVAL
Examine when changing
cylinders, replace every 5
years
1 year
5 years
5 years
1 year
1 year
5 years
5 years
5 years
9/48
GUIDELINES OF WRITTEN SCHEME
a. Replace with new hose.
b. Record replacement.
a. Visual, external examination.
b. Anneal if work-hardened or
replace.
c. Fit new seals where applicable.
d. Record all details of examination.
a. Replace with new tailpipe.
b. Record replacement.
a. Visual, external examination.
b. Replace with new hose.
c. Record replacement.
a. Visual, external examination.
b. Pressure test.
c. Record all details of examination.
a. Visual, external examination.
b. Replace valve with new or refur-
bished unit.
c. Record all details of examination.
a. Replace with new or manufac-
turer's refurbished unit.
b. Record all details.
a. Replace non-return valves.
b. Replace seals/glands/o-rings
c. Pressure test.
d. Record all details of examination.
a. Replace seals/glands/o-rings.
b. Functional test.
c. Record all details of examination.
EN