Sandrigarden HTG 26/55 Manual De Instrucciones página 13

HEDGETRIMMER OPERATING MANUAL
B6 – HEDGETRIMMER users must be
in good physical condition. DO NOT
USE the machine if you feel tired, ill or
are under the influence of alcohol or
other drugs.
B7 - CAUTION! Exhaust fumes are
toxic and asphyxiating. If inhaled, these
fumes may even be lethal. Do not start
the engine in closed or poorly ventilate
environments.
B8 - Prolonged use of the machine may
hinder blood circulation to the hands
(Raynaud's phenomenon) due to vi-
brations.
The following factors may pose a risk to
the operator's health:
- Operator is predisposed to poor blood
circulation in the hands.
- The machine is used in cold weather
(warm gloves are strongly recom-
mended).
- The machine is used non-stop for long
periods (we suggest using it at inter-
vals).
- If you feel a tingling sensation or numb
in any way, please seek medical atten-
tion.
B8.1 - Always hold the machine with
both hands.
Stand in a safe and steady position on
both legs. Stay balanced. Do not use
on unstable ladders. To cut tall hedges,
a stable scaffold is recommended.
B9 - CAUTION! Petrol and
its vapours are highly flammable.
BURNING AND FIRE HAZARDS.
B9.1 - Stop the engine before refuel-
ling.
B9.2 - Do not smoke while refuelling.
B9.3 - Wipe off any fuel that may have
spilled. Start up the engine away from
the place where it was refuelled.
B9.4 - Make sure the tank cap is tight-
ened properly.
Beware of any leaks.
B10 – SAFETY DEVICES
B10.1 – the THROTTLE LEVER
LOCK (see fig.1 part. 17) prevents the
accidental use of the throttle control le-
ver.
B10.2 – the ENGINE CUT-OFF
SWITCH (ON/OFF) stops the engine
(fig. 1 part. 10).
DANGER! Caution! The cutting blade
continues to spin for a while even after
the power switch has been shut "OFF".
3. DESCRIPTIONS OF MACHINE
PARTS
Fig. 1 LEGEND
1) Starter grip
2) Starter
3) Chock lever
4) Spark plug cap
5) Fuel cap
6) Front handle with guard
7) Combustion engine
8) Fuel tank
9) Rear handle with adjustable controls
10) Engine cut-off switch ON/OFF.
11) Throttle trigger lock out
12) Throttle control lever
13) Cutting blades
14) Cutting blade sleeve
15) Gearbox
16) Blunt extension
17) Rear handle rotation lock control
GB
13