Tabla de contenido
Publicidad
Fan specification:
−
air flow: 55 l/s (120 CFM)
−
input voltage: 120 Vac 50-60 Hz
−
maximum power: 17 W
−
dimensions: 127 x 127 mm (5 x 5 inches)
To fix the fan to the pump, position it ensuring that
the holes in the plate line up with those in the
pump base. Insert the respective washers and
screws and tighten with a screwdriver. Connect
the fan to the controller.
WATER COOLING KIT INSTALLATION
Two types of water cooling kits are available to be
mounted when the pump is used under heavy load
conditions or when air cooling is insufficient.
The two model part numbers are: 969-9337
(metallic model), and 969-9347 (plastic model).
Model 969-9337
Model 969-9347
!
The items of the plastic model kit must be assem-
bled as shown in the following figure
The assembled kit must be screwed into the suit-
able holes of the pump body with a recommended
closing torque of 5 Nm.
Two 6 mm (1/4") internal diameter rubber or plastic
hoses from the water supply must be fitted to the
two nozzles.
37
TECHNICAL INFORMATION
CAUTION
87-900-973-01
Publicidad
Tabla de contenido
