Tabla de contenido
Publicidad
de medidas especiales.
Anchura de 1240 a 1640 mm.
9. GARANTIA
Todos los productos VIRUTEX tienen una garantía
válida para 12 meses a partir del día de su suministro,
quedando excluidas todas las manipulaciones o daños
ocasionados por manejos inadecuados o por degaste
natural del producto.
Para cualquier reparación dirigirse al servicio oficial de
asistencia técnica VIRUTEX.
VIRUTEX se reserva el derecho de modificar sus productos
sin previo aviso.
E N G L I S H
TEMPLATE FOR MOUNTING JAMBS
AND ARCHITRAVES
TECHNICAL CHARACTERISTICS
Minimum template aperture.....................1905x620x35 mm
Maximum template aperture.......................2160 x1020 mm
Maximum jamb width................................................200 mm
Package dimensions.........................1895 x 675 x 108 mm
Weight........................................................................12.9 kg
1. PURPOSE OF THE TEMPLATE
This template is for PERFECT mounting of jambs and
architraves on inner frames for doors and serves to
secure them with polyurethane foam onto both new
and existing construction.
This template allows you to use the existing doors on
unlined jambs as you are able to cut back and line the
jambs and then replace the same door.
2. BASIC INFORMATION
Firstly, establish the dimensions of the door (height, width
and depth) and check on the chart that it is within the
maximum and minimum limits.
SIZES OF FLAT WOODEN DOORS TO UNE 56802
Door Type Height mm. Width mm. Depth mm.
Internal
door
2030
External
2030
front door
The template PB83E is designed for work with the
following recommended door sizes:
625
35
725
40
825
45
825
40
45
HEIGHT:
(max. 2160 mm) (min. 1905 mm)
WIDTH:
(max. 1020 mm) (min. 620 mm)
DEPTH:
(max. 45 mm) (min. 35 mm)
3. UNPACKING
Inside the packing box you will find the following
material: (Fig. 4)
Letter
Name
Mounted template
A
Set with architrave stops and feet
B
Set with architrave stops and feet
C
Safety plug
And the following documents:
- Instruction manual
- Guarantee
4. MOUNTING THE TEMPLATE
1.- Fit feet "A" and "B" in their positions following the
(Fig. 4) diagram
2.- Secure the architrave stops with the safety plug "C"
and the template is now ready for use.
5. PREPARING THE TEMPLATE
5.1.1. HEIGHT
Adjust the height of the template using feet "A" and "B"
using the millimeter rules which determine the height of
the door, and stop it with the knobs "D" (Fig. 1)
5.1.2. WIDTH
Adjust the width of the template using the guides along
the millimeter rules which determine the width of the
door (Fig. 1) and stop it using knobs "E".
When carrying out these two operations,
take into consideration the play for width
and height required between the door
and the jamb.
5.2. PREPARING THE JAMBS AND ARCHITRAVES
5.2.1. JAMBS
Mitre cut the jambs according to the measurements
marked on the template.
Remember that the measurements are between gains
(rebates).
5.2.2. ARCHITRAVES (Inner and outer)
Cut the architraves (moldings) according to the sizes to
which the jambs have been cut.
Examples of cut:
- Jamb size between gains: 620 mm width x 2030 height
Quantity
1
1
1
6
7
Publicidad
Tabla de contenido
