Getting Started; Basic Function; Flashing Light - Manta SPK614 Manual De Usuario

GETTING STARTED

POWER SOURCE
This unit works with rechargeable lead-acid battery (the battery capacity 4000mAh). Fully charge the unit before
using the product for the first time. Unplug the AC Power cord from the AC socket to work on the battery pack after
fully charged. Plugging the AC Power cord while the battery pack is attached initiates the charging of this battery,
the charge LED indicator lights red during charging, when the battery is fully charged the indicator will turn to
green. When the unit is with low battery, the LED indicator will flash in red.
Warning: Do not change the battery, only high-qualified personnel can perform this operation.
OPERATION INSTRUCTION

BASIC FUNCTION

TURNING THE UNIT ON/OFF
Press the power ON/OFF button on the rear cabinet to switch the unit on/off.
NOTE: In USB/Bluetooth/AUX mode, when the unit is not providing the main function for around 15 minutes, the
unit will automatically switch into standby mode. Press the FUNCTION/ /Light button to turn on the unit again.
Please note that low volume setting in the audio source may be recognized as "no audio signal", this will affect the
capability of signal detection from the device and can also originate an automatic switch into standby mode. If
this happens please reactivate the audio signal transmission or increase the volume setting on the audio source
player in order to resume playback.
Electrostatic Discharge hints – The unit may reset or may not reset to normal operation mode due to electrostatic
discharge, just switch it off and reconnect again.
SETTING THE FUNCTION MODE
To change the function modes, press the FUNCTION/ /Light button repeatedly to choose USB/BT/AUX/Radio
function.
ADJUSTING THE VOLUME
Press the or , button to increase and decrease volume.
EQUALIZER (EQ) FUNCTION
This unit has a built-in equalizer system, press the EQ/P-MODE button to select a setting that best matches the
music style: FLAT, POP, CLASSIC, JAZZ, and ROCK.

FLASHING LIGHT

There are 5 modes for the DISCO LED lighting. Press and hold the LIGHT button to choose the light modes.
L-1: By default mode, blue LED will be on constantly when it is selected.
L-2: Blue LED will be on flashing mode.
L-3: Red LED will be on constantly.
L-4: Red LED will be on flashing mode.
L-5: 7 colors LED will be on flashing mode.
Press one more time to turn off.
The straight light bar will light when the Blue/Red LED on constantly, the bar will keep flashing when LED in
flashing mode.
EN – SPK614
9