Automatic Operation - Amica 10143.3TsPrDbHaJXSp Manual De Instrucciones

OPERATION
Semi–automatic operation
If the oven is to be switched off at a given
time, then you should:
lSet the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
lPress sensor 1 until the display will show:
80
2
lSet the required time using sensors 3 and 2,
within a range from 1 minute to 10 hours.
The set time will be introduced to the memory
after approx. 7 seconds and the display will
show AUTO function.
When the set time has passed the oven is
switched off automatically, the alarm signal
is activated and the signal function AUTO
flashing again;
lSet the oven function knob and the tem-
perature regulator knob to the switched–off
position.
lPress sensor 1, 2 or 3 in order to switch off
the signal; the signal function will go out and
the display will show the current time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
80
1 3

Automatic operation

If the oven is to be switched on for a specified
period of time and switched off at a fixed hour
then you should set the operation time and
the operation end time:
lPress sensor1 until the display will show:
80
2
lSet the required time using the sensors
3 and 2 within a range from 1 minute to 10
hours.
lPress sensor 1 until the display will show:
88
2
lSet the switch–off time (operation end time)
using sensors 3 and 2, which is limited to a
period of 23 hours and 59 minutes from the
current time.
lSet the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
41
80
1 3
80
1 3