Aiwa CT-FX530M Manual De Instrucciones página 14

DSSA (Drivers Sound Stage
Adjustment)
You can adjust sound stage and tone balance to
best serve a particular seat in the car.
1
Press SEL repeatedly to select DSSA
(Drivers Sound Stage Adjustment)
mode.
2
Rotate the Jog Dial to select the position
of sound stage.
Sound stage changes as follows.
↓
OFF
For the front left seat
For the front right seat
↑
Note
When DSSA is activated, you cannot adjust BAL
(balance), FAD (fader), BASS and TRE (treble)
modes.
Source Level Adjuster
You can adjust the output level in each mode to
equalize the volume level.
1
Press FUNC repeatedly to select the
desired mode.
2
Press DISP while pressing SEL.
The "LEVEL 0" indication appears.
3
Rotate the Jog Dial to adjust the level.
Rotate clockwise to increase the output level.
Rotate counterclockwise to decrease the
output level.
If you do not operate the Jog Dial within 5
seconds, this function is canceled, and the
indication returns to the current source mode.
Returning to the factory settings
Adjusted settings of VOL, BASS, TRE, BAL,
FAD, H-BASS, DSSA, and source level can be
returned to the factory settings with a simple
operation.
1
With the unit off, press and hold DISP
for more than 2 seconds.
The "LEVEL--" indication appears, and all
sound settings are returned to the factory
settings.
12
ENGLISH
tousi-E-13