LEMAN PON400 Manual De Instrucciones página 59

Evevation Tension
Adjustment Screws
Conveyor
Feed Motor
Extension
Table
On/Off Switch and
Variable Speed Control
Box
ASSEMBLY
After unpacking your WDS Wide Drum Sander and checking the Loose Parts List for
missing components, you are ready to assemble and install the Height Adjustment
Handle Assembly.
1. Screw the Height Adjustment Handle into the threaded nut in the Height Adjustment
Crank using a slotted screwdriver until snug. (See Figure 4.)
Height Adjustment
Handle
Height Adjustment
Crank
Sanding Drum
Motor
８
EN
Sanding Drum
Nip Guard
Elevation
Tension
Adjustment
Screws
Feeding Conveyor
Threaded Nut
MS3140 DRUM SANDER
Figure 2
Figure 3