Charging The Device; Attaching The Brush; Device Description - Medel FACE BRUSH Instrucciones De Uso

Do not use the facial brush on animals. The device is not suitable for children under 8 years.
The device is only intended for the purpose described in these instructions for use. The manufacturer is not liable for
damage resulting from improper or careless use.
5. Warnings and safety notes
WARNING
• Danger of suffocation by packaging material. Keep packaging material away from children.
• Before use, inspect the device and accessories for visible damage. If you have any doubts, do not use the device
and contact your retailer or the specified Customer Services address.
• Keep the mains adapter away from water.
• Protect the device and the charger from knocks, damp, dust, chemicals, drastic changes in temperature and nearby
sources of heat (ovens, heaters).
• To prevent damage to the eyes never look directly at the blue light!
WARNING
Do NOT use the device
• on broken skin.
• on open wounds.
• if you suffer from a skin disease or irritated skin.
• immediately after sunbathing.
• if you are taking medication that contains steroids.
Notes on handling rechargeable batteries
• If your skin or eyes come into contact with fluid from the battery cell, flush out the affected areas with plenty of wa-
ter and seek medical assistance.
• Risk of explosion! Never throw batteries into a fire.
• Do not disassemble, split or crush the rechargeable batteries.
• Only use chargers specified in the instructions for use.
• Batteries must be charged correctly prior to use. The instructions from the manufacturer and the specifications in
these instructions for use regarding correct charging must be observed at all times.
• Fully charge the battery prior to initial use (see Chapter 7.1).
• In order to achieve as long a battery service life as possible, fully charge the battery at least twice per year.
IMPORTANT
Only specialist personnel may perform repairs on electrical devices. Improper repairs may subject users to consider-
able danger. In the event of a fault or damage, have the device repaired by a certified specialist workshop.
6.

Device description

Brush attachment
ON/OFF/speed button
Function button
10
100129_MEDEL BD FACE BRUSH 95158_USER MANUAL_REV.01_05.06.2017.indd 10-11
7.

7.1 Charging the device

Charge the device for at least 6 hours before initial operation. To do this, proceed as follows:
1. Insert the mains cable into the charger.
2. Plug the mains adapter into the socket.
3. Insert the facial brush into the charger from above. Whilst charging, the blue LED light in the brush head flashes. As

7.2 Attaching the brush

The device features a soft brush attachment.
1. Fit the soft brush attachment onto the mounting fixture of the device from the front.
2. To remove the brush attachment after use, pull it forwards.
8.
1. Moisten the attached brush attachment with water. Never use the device with a dry brush attachment as this can
2. Apply the cleansing gel to your facial skin.
3. To switch on the device, press and hold the ON/OFF/speed button for one second. The brush attachment will
4. The device features a slow, medium and fast speed setting. To switch between the individual speed settings, briefly
5. Using the function button, select your desired function. The device has a vibration function for gentle facial cleans-
6. If you have problem skin, you can switch on a blue light during use which combats skin impurities and blemishes.
7. Now apply the device gently to your face and cleanse your facial skin using even movements to remove residue,
To ensure comfortable treatment, do not press the brush attachment too firmly against the skin. Treat each section of skin
for a maximum of 20 seconds.
The brush features a 1-minute timer and stops every 20 seconds for 1 second to indicate that you should switch to cleans-
Light button ing a different area. The facial brush switches itself off automatically after 3x 20 seconds. The recommended application
period per use is 1 minute.
8. Switch off the device after use. To switch off the device, press and hold the ON/OFF/speed button for one second.
9. Cleanse your face thoroughly with water to remove any residue from your skin.
10. Pat your skin dry with a towel and then apply a moisturising cream using even, circular movements.
9.
Before beginning cleaning, always pull the mains adapter out of the socket.
Initial use
soon as the facial brush is fully charged, the blue LED light is lit permanently.
Use
irritate the skin.
begin to vibrate.
press the ON/OFF/speed button.
ing and a pulsation function for thorough facial cleansing.
To add the blue light function, press the light button. If you have activated the pulsation function, the blue light pul-
sates and is not permanently lit.
dirt and dead skin cells.
Note
Cleaning
IMPORTANT
11
05/06/2017 13:54:17