Scope Of Delivery - Berner 49684 Manual De Instrucciones

GB IRL
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature (→Table 1). Protect the device from frost.
Never blow through the nozzles or valves with your mouth.
Use only spare and accessory parts from the manufacterer.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the piston pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section "After Use", Section 1).

Scope of delivery

Tank [1], pump [2], hose [3], instructions for use [4], lever set [5] (only for 3270..), spray
wand [6], shut-off valve [7], carrying strap [8].
You will find the illustrations referred to above in the front fold-out pages 2 – 4 of the
instructions for use, as well as on the insert.
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Pressure change from 0 to 3 bar
(43.5 psi)
Table 1
Assembly
1. Attach the carrying strap [8] to the tank. (Fig. 2)
2. Push the tube [3] into the fixture [10] and secure it with the cap nut. (Fig. 4)
3. Push the hose [3] onto the shut-off valve [7] and secure it with the cap nut. (Fig. 4)
4. Screw the spray wand [6] onto the shut-off valve [7] (Fig. 4)
AUS USA
3270..
10 l (2.2 gal)
12.5 l (2.75 gal)
3.25 kg (7.15 lb)
12
NZ CDN
5 l (1.1 gal)
8 l (1.8 gal)
3 bar (43.5 psi)
40 ° C (104 F)
2.8 kg (6.16 lb)
Polyethylene
on the side
< 0.07 l (< 0.02 gal)
1 l/min (0.22 gal/min)
< 5 N
min. 5000 x
IND
3275..