Genesis GLSDF36A Manual Del Operario página 4

• Do not force the power tool.
it is designed. forcing the tool could possibly damage the tool and may result in personal injury.
• Use the correct power tool for the job.
which it is not designed.
• Do not use tool if switch does not turn it on or off.
with the switch is dangerous and must be repaired or replaced by an authorized service center.
• Store idle tool out of reach of children and other inexperienced persons.
is dangerous in the hand of untrained users.
• Maintain power tools with care.
component breaks, and any other conditions that may affect the tool's operation. A guard or any other part that is
damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.
• Use recommended accessories.
manufacturer or intended for use on this type tool may cause damage to the tool or result in personal injury to the
user. Consult the operator's manual for recommended accessories.
• Never leave the tool running unattended, turn the power off
until it comes to a complete stop.
BATTERY TOOL USE AND CARE
• ensure the switch trigger is in the off position before inserting battery
pack.
Inserting the battery pack into power tools that have the switch on invites accidents.
• Recharge only with the charger specified by the manufacturer.
suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use battery tools only with specified battery pack.
create a risk of injury and fire.
• Avoid storing battery pack in a container with other metal objects
as nails, coins, clips, keys, screws, or other small metal objects that can make a connection from one terminal
to another. Always protect the battery terminals when battery pack is not being used. Connecting the battery
terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery.
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
• Battery tools do not need to be plugged into an electrical outlet,
are always in operation condition. Be aware of possible hazards when not using your battery tool or when changing
accessories. following this rule will reduce the risk of electric shock, fire or personal injury.
SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts.
• Service your power tool periodically.
portion of the tool since internal wires may be misplaced or pinched.
Screwdriver/Flashlight 3.6V
Operator's Manual
The tool will perform the job better and safer at the feed rate for which
Don't force the tool or attachment to do a job for
Check for proper alignment and binding of moving parts,
using accessories and attachments not recommended by the
This will ensure that the safety of the power tool is maintained.
When cleaning a tool, be careful not to disassemble any
GLSDF36A
Any tool that cannot be controlled
. Do not leave the tool
A charger that is
use of any other battery packs may
such
Avoid
herefore, they
t
It