Feeding Procedures; Agitators Assembling; Bowl Assembling; Cleaning - Skymsen BPS-30CE Manual De Instrucciones

service company ("Service Company"). Products held at commercial facilities and weighing
less than seventy (70) lbs. must be taken or shipped, shipping charges are prepaid, either
to SKYFOOD's facility or to a Service Company. Mileage or travel time will NOT be paid.
SKYFOOD offers a limited on-site warranty for products ONLY held at commercial
facilities, whose net weight exceeds seventy (70) lbs., provided they are installed in a
location that is within a thirty (30) mile radius of a Service Company. End Users are
responsible for all extra travel and mileage rates. In this case, warranty services will be
provided during regular business hours.
This product will be replaced or repaired under warranty, for a period of (1) year,
beginning from the date of purchase by the original purchaser/user ("End User").
Accessories will be replaced or repaired under warranty, for a period of (30) days,
beginning from the date of purchase by the original purchaser/user ("End User").
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIPMENT, LLC, wit hin thirty
(30) days from the date of purchase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD's website www.skyfood.us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SKYFOOD
according to the instructions posted on the referred website. Failure to do so will VOID
the warranty.
For questions or assistance, do not return the product or accessories to the store, please
call Toll Free 1 -800-503-7534 for Customer Support, or visit the Customer Service section
of www.skyfood.us. For faster service please have the items name, serial number, and
proof of purchase for the operator to assist you.
SKYFOOD reserves the right to change the terms of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The end
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on August 22

3.2 Feeding Procedures

Choose the agitator to be used: Whip (No.1 Pic 03), Racket (No. 01 Pic 02) or spiral (No. 01
Pic 04), put the ingredients into the Bowl (No.05 Pic 01), move down the Safety Cage (No.01
Pic 01), turn the timer (No.02 Pic 05), select the time and select the speed (No.01 Pic 05).

3.3 Agitators Assembling

All agitators (Pic 01 / 02 and 03) are assembled in the same way.
*Lift the Agitator Shaft Holder (No.01 Pic 07), placed in the shaft (No.02 Pic 07).
*Place the hole, located in the Agitator, in the Pin (No.03 Pic 07).
*Move the Agitator Shaft Holder down(No.01 Pic 07).

3.4 Bowl Assembling

* Place the Bowl on the bowl support (Nº 04 Pic.01).
* Place the guide (Nº01 Pic.08) located on the bowl into the spot (Nº02 Pic.08) located on the
bowl support and after that place the holes (Nº03 Pic. 06) in the bowl support pins (Nº01
Pic.06).
* Lock the bowl in the right position, turning the lever (Nº 02 Pic.06) untill to fit in the bowl
support pins (Nº01 Pic.06).

3.5 Cleaning

All removable parts must be removed and cleaned. Clean with water and Neutral Soap.
th
, 2011.
Never do cleaning with the machine plugged in, always unplug the machine before
Never throw water directly on the machine.
Pic-01
01 - Bowl
02 - Speed Control Knob
03 - Cabinet
04 - Safety Cage
05 - Bowl Support
06 - Timer
Important
cleaning.
Important
04
01
04
06
02
03
05