Cleaning And Maintenance; Technical Specifications - HQ-Power VDPLB3D Manual Del Usuario

On
Off
On
The speed can be activated by setting DIP switches 4, 5 and 6 as follows:
Off
On
Off
On
Off
On
Off
On
Set DIP switch 10 to ON to enter the sound-activated mode.
o Put the slave unit as follows (DIP switch 10, 11 and 12 to OFF):

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply
Power Consumption
Fuse
Dimensions
VDPLB3D
VDPLB5D
Total Weight
VDPLB3D
VDPLB5D
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
VDPLB3D/VDPLB5D_v2
Off On Chase 6
On On Chase 7
On on Chase 8
DIP SWITCH
SPEED
4 5 6
Off Off Speed 1
Off Off Speed 2
On Off Speed 3
On Off Speed 4
Off On Speed 5
Off On Speed 6
On On Speed 7
On on Speed 8
max. 230VAC~50Hz
max. 12W
1A (order code FF1N)
Ø300mm
Ø500mm
2.2kg
3.8kg
Fading – yellow and blue
Fading – black and white
Fading – all colours above
RUNNING TIME
0.5 seconds
1.5 seconds
3 seconds
4.5 seconds
8 seconds
12 seconds
50 seconds
60 seconds
4 HQ POWER