Care & Maintenance; Cleaning; Storing; Resetting The Motor Thermostat - Ninja SS101 Serie Manual Del Propietário

CARE & MAINTENANCE

CLEANING

Hand-Washing
Wash containers, lids, and blade assembly
in warm, soapy water. Use a dishwashing
utensil with handle to avoid direct contact
with the blades. Exercise care when handling
the blade assembly as the blades are sharp.
Thoroughly rinse and air-dry all parts.
NOTE: The paddle in the Power Nutri™
Bowl is not removable.
STUCK-ON INGREDIENTS IN THE
POWER NUTRI BOWL
1-2 SMALL DROPS OF DISH SOAP
FILL WATER TO
TOP OF PADDLE
For stuck-on ingredients, such as nut
butter, rinse the bowl and blade assembly
under warm water.
Next, fill the bowl with warm water up to
the top of the paddle and add 1–2 small
drops of dish soap.
Screw on the blade assembly and
press BOWL. Twist the Power Paddle
counterclockwise continuously while cleaning.
Then, empty contents and rinse under
warm water and wipe with a dishwashing
utensil, if needed.
Dishwasher
Containers, lids, and blade assembly are
top-rack dishwasher safe ONLY. Ensure
the blade assembly and lid are removed
from the container before placing in
the dishwasher.
Motor Base
Unplug the unit before cleaning. Wipe
motor base with a clean, damp cloth.
12 ninjakitchen.com

STORING

For cord storage, wrap cord with hook-
and-loop fastener near the back of the
motor base. DO NOT wrap the cord around
the bottom of the base for storage.
DO NOT store blended or unblended
ingredients in the cup or bowl with the blade
assembly attached. Use only the spout
lid or storage lid when storing blended or
unblended ingredients in the containers.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside
the unit or in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE
MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the blade assembly from the
container. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, call Customer
Service at 1-877-646-5288. So we may
better assist you, please register your
product online at registeryourninja.com and
have the product on hand when you call.

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, unplug unit
before troubleshooting�
Control panel does not illuminate�
• Make sure unit is plugged in. If the unit is powered on and no container is installed, the
unit will display '- -'. The available programs will illuminate after placing a container on
base and rotating it clockwise until it clicks into place.
Control panel doesn't turn off�
• Remove container from base by rotating it counterclockwise and lifting it up. The
display with flash '- -'. Unplug the power cord from the outlet. If the unit remains
plugged in, the display will time out after 3 minutes of inactivity. Press any button to
wake the unit.
Doesn't mix well; ingredients get stuck�
• Using the Auto-iQ® programs is the easiest way to achieve great results. The pulses
and pauses allow the ingredients to settle toward the blade assembly. If ingredients
are routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs.
Next add liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or
frozen ingredients.
• If using the Power Nutri™ Bowl, during the blending process twist the Power Paddle
counterclockwise continuously to circulate ingredients.
Unit moves on counter while blending�
• Make sure the counter and feet of the unit are clean and dry.
Lid or Hybrid Edge™ Blades Assembly is hard to install on the container�
• Set the container on a level surface. Carefully place the lid or blade assembly on the
top of the container and align the threads so the lid/blade assembly sits flat. Twist
clockwise until you have a tight seal.
Can't remove the paddle from the Power Nutri Bowl�
• The paddle in the Power Nutri Bowl is not removable. For cleaning instructions, refer
to the Care & Maintenance section.
ninjakitchen.com 13