Breguet 5837 Instrucciones De Uso página 7

5837/5839
"M "
ARINE CHRONOGRAPH
( ,
ESCAPE WHEEL LEVER AND BALANCE SPRING IN SILICON
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
, ,
TOURBILLON MANUALLY WOUND
Starting the watch
Crown in position 1. This position
allows you to wind the movement. To
start the watch, wind it fully by turn-
ing the crown upwards ( ) until
resistance is felt. ON NO ACCOUNT
FORCE THE CROWN. When the resis-
tance is felt at the end of winding, it is
important to turn the crown down-
wards ( ) (at least
1
M
to release the crown wheel. Thereafter,
wind the watch daily, preferably at a
regular time.
,
)
Setting the time
Pull the crown out to position 2. Then
turn the crown upwards ( ) to move
the hands forwards to the desired
time. For accurate time-setting, ensure
that the last operation was done in a
clockwise direction. Then push the
crown back to position 1. After this
operation, rotate the crown down-
/ turn) in order wards (
4
freely.
) to make sure it turns
M